WebAssembly JavaScript Interface

This document is an early draft, porting the official JS/WebAssembly interface specification to WebIDL and Bikeshed. It should currently not be used as the WebAssembly specification.

This API is, initially, the only API for accessing WebAssembly [WEBASSEMBLY] from the web platform, through a bridge to explicitly construct modules from ECMAScript [ECMASCRIPT].

In future versions, WebAssembly may be loaded and run directly from an HTML <script type='module'> tag—and any other Web API that loads ES6 modules via URL—as part of ES6 Module integration.)

Note: WebAssembly JS API declaration file for TypeScript can be found here which enable autocompletion and make TypeScript compiler happy.

1. Sample API Usage

This section is non-normative.

Given demo.wat (encoded to demo.wasm):

(module
    (import "js" "import1" (func $i1))
    (import "js" "import2" (func $i2))
    (func $main (call $i1))
    (start $main)
    (func (export "f") (call $i2))
)

and the following JavaScript, run in a browser:

var importObj = {js: {
    import1: () => console.log("hello,"),
    import2: () => console.log("world!")
}};
fetch('demo.wasm').then(response =>
    response.arrayBuffer()
).then(buffer =>
    WebAssembly.instantiate(buffer, importObj)
).then(({module, instance}) =>
    instance.exports.f()
);

2. The WebAssembly Namespace

dictionary WebAssemblyInstantiatedSource {
    required Module module;
    required Instance instance;
};

[Exposed=(Window,Worker,Worklet)]
namespace WebAssembly {
    boolean validate(BufferSource bytes);
    Promise<Module> compile(BufferSource bytes);

    Promise<WebAssemblyInstantiatedSource> instantiate(
        BufferSource bytes, optional object importObject);

    Promise<Instance> instantiate(
        Module moduleObject, optional object importObject);
};

To compile a WebAssembly module from a BufferSource bytes, perform the following steps:

Let module be decode_module(bytes). If module is error, return error.
If validate_module(module) is error, return error.
Return module.

The validate(bytes) method, when invoked, performs the following steps:

Compile bytes as a WebAssembly module and store the results as module.
If module is error, return false.
Return true.

To construct a WebAssembly module object from a module module, perform the following steps:

Let moduleObject be a new Module object.
Set moduleObject.[[Module]] to module.
Set moduleObject.[[Bytes]] to bytes.
Return moduleObject.

To asynchronously compile a WebAssembly module from a BufferSource bytes, with the promise promise, using optional task source taskSource, perform the following steps:

In parallel, compile the WebAssembly module bytes and store the result as module.
When the above operation completes, queue a task to perform the following steps. If taskSource was provided, queue the task on that task source.
1. If module is error, reject promise with a CompileError exception.
2. Otherwise,
  1. Construct a WebAssembly module object from module and let moduleObject be the result.
  2. Resolve promise with moduleObject.

The compile(bytes) method, when invoked, performs the following steps:

Let stableBytes be a copy of the bytes held by the buffer bytes.
Let promise be a new promise.
Asynchronously compile a WebAssembly module from stableBytes with promise.
Return promise.

To instantiate a WebAssembly module from a Module moduleObject and imports importObject, perform the following steps:

Let module be moduleObject.[[Module]].
If module.imports is not an empty list, and importObject is undefined, throw a TypeError exception.
Let funcs be an empty list of callable JavaScript objects.
Let memories be an empty list of Memory objects.
Let tables be an empty list of Table objects.

Note: The funcs, memories and tables lists are collected and used in order to cache the JavaScript objects corresponding to WebAssembly objects. If a WebAssembly object is exported multiple times, it will appear in exports as the same object instance. Moreover, if a JavaScript wrapper of a WebAssembly object was imported, and then present on the export, a new wrapper will not need to be created. However, if an ordinary JS function is imported, it will appear as wrapped by an Exported Function.
Let imports be an empty list of external values.
For each (moduleName, componentName, externtype) in module_imports(module), do
1. Let o be ? Get(importObject, moduleName).
2. If Type(o) is not Object, throw a TypeError exception.
3. Let v be ? Get(o, componentName)
4. If externtype is of the form 𝖿𝗎𝗇𝖼 functype,
  1. If IsCallable(v) is false, throw a LinkError exception.
  2. If v has a [[FunctionAddress]] internal slot, and therefore is an Exported Function,
    1. Let funcaddr be the value of v’s [[FunctionAddress]] internal slot.
    Note: The signature is checked by instantiate_module invoked below.
    1. Append v to funcs.
  3. Otherwise,
    1. Create a host function from v and let funcaddr be the result.
  4. Let externfunc be the external value 𝖿𝗎𝗇𝖼 funcaddr
  5. Append externfunc to imports.
5. If externtype is of the form 𝗀𝗅𝗈𝖻𝖺𝗅 globaltype,
  1. If globaltype is i64 or Type(v) is not Number, throw a LinkError exception.
  2. Let value be ToWebAssemblyValue(v, globaltype.valtype)
  3. Assert: globaltype.mut is const, as verified by WebAssembly validation.
  4. Let store be the current agent cluster’s associated store.
  5. Let (store, globaladdr) be alloc_global(store, globaltype, value).
  6. Set the current agent cluster’s associated store to store.
  7. Let externglobal be 𝗀𝗅𝗈𝖻𝖺𝗅 globaladdr.
  8. Append externglobal to imports.
6. If externtype is of the form 𝗆𝖾𝗆 memtype,
  1. If v is not a Memory object, throw a LinkError exception.
  Note: instantiate_module invoked below will check the imported Memory's size against the importing module’s requirements.
  1. Append v to memories.
  2. Let externmem be the external value 𝗆𝖾𝗆 v.[[Memory]].
  3. Append externmem to imports.
7. Otherwise, externtype is of the form 𝗍𝖺𝖻𝗅𝖾 tabletype,
  1. If v is not a Table instance, throw a LinkError exception.
  Note: The table’s length, etc. is checked by instantiate_module invoked below.
  1. Append v to tables.
  2. Let tableaddr be v.[[Table]]
  3. Let externtable be the external value 𝗍𝖺𝖻𝗅𝖾 tableaddr.
  4. Append externtable to imports.
  5. For each element func of v.[[Values]],
    1. If func is not null, append func to funcs.
Let (store, instance) be instantiate_module(store, module, imports), up through step 16 of the instantiation algorithm, but omitting execution of the start function.
If instance is error, throw a LinkError exception, or other appropriate exception type.
For each tableaddr in instance.𝗍𝖺𝖻𝗅𝖾𝖺𝖽𝖽𝗋𝗌,
1. If there is no element in tables whose table.[[Table]] is tableaddr:
  1. Let table be a new table object from tableaddr.
  2. Append table to tables.
2. Otherwise:
  1. Let table be the element in tables where table.[[Table]] is tableaddr.
3. For each index i from 0 to the length of table.[[Values]] − 1, do
  1. Let funcaddr be read_table(store, tableaddr, i).
  2. Assert: funcaddr is not error because this read is in bounds.
  3. If funcaddr is not empty,
    1. If funcs contains any func where func.[[ExportedAddress]] is funcaddr,
      1. Let func be that function object.
    2. Otherwise:
      1. Let func be a a new Exported Function created from funcaddr.
      2. Append func to funcs.
    3. Set the table.[[Values]][i] to func.
    Note: The table and function objects created by the above steps are only observable for tables that are either imported or exported.
Let startfuncaddr be the start function of instance.
Let (store, ret) be invoke_func(store, startfuncaddr, empty).
If ret is error, throw an exception. This exception should be a WebAssembly RuntimeError exception, unless otherwise indicated by the WebAssembly error mapping.
Assert: ret is empty.
Let exportsObject be ! ObjectCreate(null).
For each pair (nameBytes, externtype) in module_exports(module),
1. Let name be nameBytes decoded as UTF-8.
2. Assert: name is not failure (module is valid).
3. Let externval be get_export(instance, name).
4. If externtype is of the form 𝖿𝗎𝗇𝖼 functype,
  1. If funcs contains an entry func where func.[[FunctionAddress]] is externval, let value be func
  2. Otherwise,
    1. Let func be the result of a new Exported Function from externval.
    2. Append func to funcs.
    3. Let value be func.
5. If externtype is of the form 𝗀𝗅𝗈𝖻𝖺𝗅 globaltype,
  1. If globaltype.valtype is an i64, throw a LinkError exception.
  2. Assert: globaltype.mut is const.
  3. Let value be ToJSValue(read_global(store, externval)).
6. If externtype is of the form 𝗆𝖾𝗆 memtype,
  1. If there is an element memory in memories such that memory.[[Memory]] is externval, then let value be memory
  2. Otherwise:
    1. Let memory be a new Memory object from externval.
    2. Append memory to memories.
    3. Let value be memory.
7. Otherwise, externtype is of the form 𝗍𝖺𝖻𝗅𝖾 tabletype,
  1. Let value be the unique table in tables such that table.[[Table]] is externval.
8. Let status be ! CreateDataProperty(exportsObject, name, value).
9. Assert: status is true.
Note: the validity and uniqueness checks performed during WebAssembly module validation ensure that each property name is valid and no properties are defined twice.
Perform ! SetIntegrityLevel(exportsObject, "frozen").
Let instanceObject be a new Instance object whose internal [[Instance]] slot is set to instance and the [[Exports]] slot to exportsObject.
Return instanceObject.

To instantiate a promise of a module promiseOfModule with imports importObject, perform the following steps:

Let promise be a new promise
Upon fulfillment of promiseOfModule with value module:
1. Instantiate the WebAssembly module module importing importObject, and let instance be the result. If this throws an exception, catch it, reject promise with the exception, and abort these substeps.
2. Let result be a WebAssemblyInstantiatedSource dictionary with module set to module and instance set to instance.
3. Resolve promise with result.
Upon rejection of promiseOfModule with reason reason:
1. Reject promise with reason.
Return promise.

Note: It would be valid to perform certain parts of the instantiation in parallel, but several parts need to happen in the event loop, including JavaScript operations to access the importObject and execution of the start function.

The instantiate(bytes, importObject) method, when invoked, performs the following steps:

Let stableBytes be a copy of the bytes held by the buffer bytes.
Let promiseOfModule be a new promise.
Asynchronously compile a WebAssembly module from stableBytes with promiseOfModule.
Instantiate promiseOfModule with imports importObject and return the result.

The instantiate(moduleObject, importObject) method, when invoked, performs the following steps:

Let promise be a new promise.
Queue a task to perform the following steps:
1. Instantiate the WebAssembly module module importing importObject, and let instance be the result. If this throws an exception, catch it, and reject promise with the exception.
2. Resolve promise with instance.
Return promise

Note: A follow-on streaming API is documented in the WebAssembly design repository.

2.1. Modules

enum ImportExportKind {
  "function",
  "table",
  "memory",
  "global"
};

dictionary ModuleExportDescriptor {
  required DOMString name;
  required ImportExportKind kind;
  // Note: Other fields such as signature may be added in the future.
};

dictionary ModuleImportDescriptor {
  required DOMString module;
  required DOMString name;
  required ImportExportKind kind;
};

[LegacyNamespace=WebAssembly, Constructor(BufferSource bytes), Exposed=(Window,Worker,Worklet)]
interface Module {
  static sequence<ModuleExportDescriptor> exports(Module module);
  static sequence<ModuleImportDescriptor> imports(Module module);
  static sequence<ArrayBuffer> customSections(Module module, DOMString sectionName);
};

The string value of the extern type type is

"function" if type is of the form 𝖿𝗎𝗇𝖼 functype
"table" if type is of the form 𝗍𝖺𝖻𝗅𝖾 tabletype
"memory" if type is of the form 𝗆𝖾𝗆 memtype
"global" if type is of the form 𝗀𝗅𝗈𝖻𝖺𝗅 globaltype

The exports(moduleObject) method, when invoked, performs the following steps:

Let module be moduleObject.[[Module]].
Let exports be an empty list.
For each (nameBytes, type) in module_exports(module)
1. Let name be nameBytes decoded as UTF-8.
2. Assert: name is not failure (module is valid).
3. Let kind be the string value of the extern type type.
4. Let obj be a new ModuleExportDescriptor dictionary with name name and kind kind.
5. Append obj to the end of exports.
Return exports.

The imports(moduleObject) method, when invoked, performs the following steps:

Let module be moduleObject.[[Module]].
Let imports be an empty list.
For each (moduleBytes, nameBytes, type) in module_imports(module),
1. Let moduleName be moduleBytes decoded as UTF-8.
2. Let name be nameBytes decoded as UTF-8.
3. Assert: The previous operations are not failure, as module is valid.
4. Let kind be the string value of the extern type type.
5. Let obj be a new ModuleImportDescriptor dictionary with module moduleName, name name and kind kind.
6. Append obj to the end of imports.
Return imports.

The customSections(moduleObject, sectionName) method, when invoked, performs the following steps:

Let bytes be moduleObject.[[Bytes]].
Let customSections be an empty list of ArrayBuffers.
For each custom section customSection in the binary format of bytes,
1. Let name be the name of the custom section, decoded as UTF-8.
2. Assert: name is not failure (moduleObject.[[Module]] is valid).
3. If name equals secondName as string values,
  1. Append a new ArrayBuffer containing a copy of the bytes held by the buffer bytes for the range matched by this customsec production.
Return customSections.

The Module(bytes) constructor, when invoked, performs the follwing steps:

Let stableBytes be a copy of the bytes held by the buffer bytes.
Compile the WebAssembly module stableBytes and store the result as module.
If module is error, throw a CompileError exception.
Return module.

2.2. Instances

[LegacyNamespace=WebAssembly, Constructor(Module module, optional object importObject), Exposed=(Window,Worker,Worklet)]
interface Instance {
  readonly attribute object exports;
};

The Instance(module, importObject) constructor, when invoked, instantiates the WebAssembly module module importing importObject and returns the result.

The getter of the exports attribute of Instance returns the receiver’s [[Exports]] internal slot.

2.3. Memories

dictionary MemoryDescriptor {
  required [EnforceRange] unsigned long initial;
  [EnforceRange] unsigned long maximum;
};

[LegacyNamespace=WebAssembly, Constructor(MemoryDescriptor descriptor), Exposed=(Window,Worker,Worklet)]
interface Memory {
  void grow([EnforceRange] unsigned long delta);
  readonly attribute ArrayBuffer buffer;
};

A Memory object represents a single memory instance which can be simultaneously referenced by multiple Instance objects. Each Memory object has two internal slots:

[[Memory]] : a memory address
[[BufferObject]] : an ArrayBuffer whose Data Block is identified with the above memory address

To create a memory object from a memory address memaddr, perform the following steps:

Let block be a Data Block which is identified with the underlying memory of memaddr
Let buffer be a new ArrayBuffer whose [[ArrayBufferData]] is block and [[ArrayBufferByteLength]] is set to the length of block.
Return a new Memory instance with [[Memory]] set to memaddr and [[BufferObject]] set to buffer.

Any attempts to detach buffer, other than the detachment performed by grow(delta), will throw a TypeError exception. Specifying this behavior requires changes to the ECMAScript specification.

The Memory(descriptor) constructor, when invoked, performs the following steps:

If descriptor.maximum is present, let maximum be descriptor.maximum; otherwise, let maximum be empty.
Let memtype be { min descriptor.initial, max maximum }
Let store be the current agent cluster’s associated store.
Let (store, memaddr) be alloc_mem(store, memtype). If allocation fails, throw a RangeError exception.
Set the current agent cluster’s associated store to store.
Create a memory object from the memory address memaddr and return the result.

The grow(delta) method, when invoked, performs the following steps:

Let memory be the Memory instance.
Let store be the current agent cluster’s associated store.
Let memaddr be memory.[[Memory]].
Let ret be the size_mem(store, memaddr).
Let store be grow_mem(store, memaddr, delta).
If store is error, throw a RangeError exception.
Set the current agent cluster’s associated store to store.
Perform ! DetachArrayBuffer(memory.[[BufferObject]]).
Let block be a Data Block which is identified with the underlying memory of memaddr.
Assert: The size of block is the same as size_mem(store, memaddr) * 64 Ki
Let buffer be a new ArrayBuffer whose [[ArrayBufferData]] is block and [[ArrayBufferByteLength]] is set to the length of block.
Set memory.[[BufferObject]] to buffer.
Return ret.

2.4. Tables

enum TableKind {
  "anyfunc",
};

dictionary TableDescriptor {
  required TableKind element;
  required [EnforceRange] unsigned long initial;
  [EnforceRange] unsigned long maximum;
};

[LegacyNamespace=WebAssembly, Constructor(TableDescriptor descriptor), Exposed=(Window,Worker,Worklet)]
interface Table {
  void grow([EnforceRange] unsigned long delta);
  Function? get([EnforceRange] unsigned long delta);
  void set([EnforceRange] unsigned long delta, Function? value);
  readonly attribute unsigned long length;
};

A Table object represents a single table instance which can be simultaneously referenced by multiple Instance objects. Each Table object has one internal slots:

[[Table]] : a table address
[[Values]] : a List whose elements are either null or Exported Functions.

To create a table object from a table address tableaddr, perform the following steps:

Let values be a list whose length is size_table(store, tableaddr) where each element is null.
Return a new Table instance with [[Table]] set to tableaddr and [[Values]] set to values.

The Table(descriptor) constructor, when invoked, performs the following steps:

Let n be descriptor.initial.
If descriptor.maximum is present, let m be descriptor.maximum; otherwise, let m be empty.
If m is not empty and m < n, throw a RangeError exception.
Let type be the table type {𝗆𝗂𝗇 n, 𝗆𝖺𝗑 m} 𝖺𝗇𝗒𝖿𝗎𝗇𝖼.
Let store be the current agent cluster’s associated store.
Let (store, tableaddr) be alloc_table(store, type).
Set the current agent cluster’s associated store to store.
Create a table object from the table address tableaddr and return the result.

The grow(d) method, when invoked, performs the following steps:

Let tableaddr be the Table instance’s [[Table]] internal slot.
Let initialSize be the length of the Table instance’s [[Values]] internal slot.
Let store be the current agent cluster’s associated store.
Let result be grow_table(store, tableaddr, d).
If result is error, throw a RangeError exception.

Note: The above exception may happen due to either insufficient memory or an invalid size parameter.
Set the current agent cluster’s associated store to store.
Append null to the Table instance’s [[Values]] internal slot d − initialSize times.
Return initialSize.

The getter of the length attribute of Table returns the length of the table’s [[Values]] internal slot.

The get(index) method, when invoked, performs the following steps:

Let values be the Table instance’s [[Values]] internal slot.
Let size be the length of values.
If index ≥ size, throw a RangeError exception.
Return values[index].

The set(index, value) method, when invoked, performs the following steps:

Let tableaddr be the Table instance’s [[Table]] internal slot.
Let values be the Table instance’s [[Values]] internal slot.
If value is null, let elem be an empty function element.
Otherwise,
1. If value does not have a [[FunctionAddress]] internal slot, throw a TypeError exception.
2. Let funcaddr be value.[[FunctionAddress]].
Let store be the current agent cluster’s associated store.
Let store be write_table(store, tableaddr, index, funcaddr).
If store is error, throw a RangeError exception.
Set the current agent cluster’s associated store to store.
Set values[index] to value.
Return undefined.

2.5. Exported Functions

A WebAssembly function is made available in JavaScript as an Exported Function. Exported Functions are Built-in Function Objects which are not constructors, and which have a [[FunctionAddress]] internal slot. This slot holds a function address relative to the current agent cluster’s associated store.

The name of the WebAssembly function funcaddr is found by performing the following steps:

Let store be the current agent cluster’s associated store.
Let funcinst be store.𝖿𝗎𝗇𝖼𝗌[funcaddr].
If funcinst is of the form {𝗍𝗒𝗉𝖾 functype, 𝗁𝗈𝗌𝗍𝖼𝗈𝖽𝖾 hostfunc},
Assert: hostfunc is a JavaScript object and IsCallable(hostfunc) is true.
Let name be ? Get(hostfunc, "name").
Return ? ToString(name).
Otherwise,
Let moduleinst be funcinst.𝗆𝗈𝖽𝗎𝗅𝖾.
Assert: funcaddr is contained in moduleinst.𝖿𝗎𝗇𝖼𝖺𝖽𝖽𝗋𝗌.
Let index be the index of moduleinst.𝖿𝗎𝗇𝖼𝖺𝖽𝖽𝗋𝗌 where funcaddr is found.
Return ! ToString(index).

To create a new Exported Function from a WebAssembly function address funcaddr, perform the following steps:

Let steps be "call the Exported Function funcaddr with arguments."
Let realm be the current Realm.
Let function be CreateBuiltinFunction(realm, steps, %FunctionPrototype%, « [[FunctionAddress]]).
Set function.[[FunctionAddress]] to funcaddr.
Let store be the current agent cluster’s associated store.
Let functype be type_func(store, funcaddr).
Let [arguments] → [results] be functype.
Let arity be the length of arguments.
Perform ! DefinePropertyOrThrow(function, "length", PropertyDescriptor {[[Value]]: arity, [[Writable]]: false, [[Enumerable]]: false, [[Configurable]]: true}).
Let name be the name of the WebAssembly function funcaddr.
Perform ! SetFunctionName(function, ! ToString(index)).
Return function.

To call an Exported Function with function address funcaddr and a list of JavaScript arguments argValues, perform the following steps:

Let store be the current agent cluster’s associated store.
Let functype be type_func(store, funcaddr).
Let [parameters] → [results] be functype.
If parameters or results contains an i64, throw a TypeError.

Note: the above error is thrown each time the [[Call]] method is invoked.
Let args be an empty list of WebAssembly values.
Let i be 0.
For each type t of parameters,
1. If the length of argValues > i, let arg be argValues[i].
2. Otherwise, let arg be undefined.
3. Append ToWebAssemblyValue(arg, t) to args.
Let (store, ret) be the result of invoke_func(store, funcaddr, args).
Set the current agent cluster’s associated store to store.
If ret is error, throw an exception. This exception should be a WebAssembly RuntimeError exception, unless otherwise indicated by the WebAssembly error mapping.
If outArity is 0, return undefined.
Otherwise, return ToJSValue(v), where v is the singular element of ret.

Note: Calling an Exported Function executes in the [[Realm]] of the callee Exported Function, as per the definition of built-in function objects.

Note: Exported Functions do not have a [[Construct]] method and thus it is not possible to call one with the new operator.

To create a host function from the JavaScript object func, perform the following steps:

Let hostfunc be a host function which performs the following steps when called:
1. If the signature contains an i64 (as argument or result), the host function throws a TypeError when called.
2. Let arguments be a list of the arguments of the invocation of this function.
3. Let jsArguments be an empty list.
4. For each arg in arguments,
  1. Append ToJSValue(arg) to jsArguments.
5. Let ret be ? Call(func, undefined, jsArguments). If an exception is thrown, trigger a WebAssembly trap, and propagate the exception to the enclosing JavaScript.
6. Let [parameters] → [results] be functype.
7. If results is empty, return undefined.
8. Otherwise, return ToWebAssemblyValue(ret, results[0]).
Let store be the current agent cluster’s associated store.
Let (store, funcaddr) be alloc_func(store, functype, hostfunc).
Set the current agent cluster’s associated store to store.
Return funcaddr

The algorithm ToJSValue(w) coerces a WebAssembly value to a JavaScript value performs the following steps:

Assert: w is not of the form 𝗂𝟨𝟦.𝖼𝗈𝗇𝗌𝗍 i64.

If w is of the form 𝗂𝟥𝟤.𝖼𝗈𝗇𝗌𝗍 i32, return the Number value for i32.
If w is of the form 𝖿𝟥𝟤.𝖼𝗈𝗇𝗌𝗍 f32, return the Number value for f32.
If w is of the form 𝖿𝟨𝟦.𝖼𝗈𝗇𝗌𝗍 f64, return the Number value for f64.

Note: Implementations may optionally replace the NaN payload with any other NaN payload at this point in the f32 or f64 cases; such a change would not be observable through NumberToRawBytes.

The algorithm ToWebAssemblyValue(v, type) coerce a JavaScript value to a WebAssembly value performs the following steps:

Assert: type is not 𝗂𝟨𝟦.𝖼𝗈𝗇𝗌𝗍.

If type is 𝗂𝟥𝟤.𝖼𝗈𝗇𝗌𝗍,
1. Let i32 be ? ToInt32(v).
2. Return 𝗂𝟥𝟤.𝖼𝗈𝗇𝗌𝗍 i32.
If type is 𝖿𝟥𝟤.𝖼𝗈𝗇𝗌𝗍,
1. Let f32 be ? ToNumber(v) rounded to the nearest representable value using IEEE 754-2008 round to nearest, ties to even mode.
2. Return 𝖿𝟥𝟤.𝖼𝗈𝗇𝗌𝗍 f32.
If type is 𝖿𝟨𝟦.𝖼𝗈𝗇𝗌𝗍,
1. Let f64 be ? ToNumber(v).
2. Return 𝖿𝟨𝟦.𝖼𝗈𝗇𝗌𝗍 f64.

2.6. Error Objects

WebAssembly defines three Error classes. WebAssembly errors have the following custom bindings:

Unlike normal interface types, the interface prototype object for these exception classes must have as its [[Prototype]] the intrinsic object %ErrorPrototype%.
The constructor and properties of WebAssembly errors is as specified for NativeError.

If an implementation gives native Error objects special powers or nonstandard properties (such as a stack property), it should also expose those on these exception instances.

[LegacyNamespace=WebAssembly]
interface CompileError { };

[LegacyNamespace=WebAssembly]
interface LinkError { };

[LegacyNamespace=WebAssembly]
interface RuntimeError { };

3. Error Condition Mappings to JavaScript

Running WebAssembly programs encounter certain events which halt execution of the WebAssembly code. WebAssembly code (currently) has no way to catch these conditions and thus an exception will necessarily propagate to the enclosing non-WebAssembly caller (whether it is a browser, JavaScript or another runtime system) where it is handled like a normal JavaScript exception.

If WebAssembly calls JavaScript via import and the JavaScript throws an exception, the exception is propagated through the WebAssembly activation to the enclosing caller.

Because JavaScript exceptions can be handled, and JavaScript can continue to call WebAssembly exports after a trap has been handled, traps do not, in general, prevent future execution.

3.1. Stack Overflow

Whenever a stack overflow occurs in WebAssembly code, the same class of exception is thrown as for a stack overflow in JavaScript. The particular exception here is implementation-defined in both cases.

Note: ECMAScript doesn’t specify any sort of behavior on stack overflow; implementations have been observed to throw RangeError, InternalError or Error. Any is valid here.

3.2. Out of Memory

Whenever validation, compilation or instantiation run out of memory, the same class of exception is thrown as for out of memory conditions in JavaScript. The particular exception here is implementation-defined in both cases.

Note: ECMAScript doesn’t specify any sort of behavior on out-of-memory conditions; implementations have been observed to throw OOMError and to crash. Either is valid here.

4. Interaction of the WebAssembly Store with JavaScript

Note: WebAssembly semantics are defined in terms of a store, representing the state of the world, or "memory". WebAssembly operations take a store and return a new store.

Each agent cluster has an associated store. When a new agent cluster is created, its associated store is set to the result of init_store().

Elements of the WebAssembly store may be identified with JavaScript values. In particular, each WebAssembly memory instance with a corresponding Memory object is identified with a JavaScript Data Block; modifications to this Data Block are identified to updating the agent cluster’s store to a store which reflects those changes, and vice versa.

WebAssembly JavaScript Interface

Draft Community Group Report, 10 November 2017

Abstract

1. Sample API Usage

2. The WebAssembly Namespace

2.1. Modules

2.2. Instances

2.3. Memories

2.4. Tables

2.5. Exported Functions

2.6. Error Objects

3. Error Condition Mappings to JavaScript

3.1. Stack Overflow

3.2. Out of Memory

4. Interaction of the WebAssembly Store with JavaScript

Conformance

Index

Terms defined by this specification

Terms defined by reference

References

Normative References

IDL Index

Issues Index